Linux version 2.6.11.4-21.7-default (geeko@buildhost) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 Thu Jun 2 14:23:14 UTC 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff40000 (usable) BIOS-e820: 000000001ff40000 - 000000001ff50000 (ACPI data) BIOS-e820: 000000001ff50000 - 0000000020000000 (ACPI NVS) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 130880 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126784 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x000f5090 ACPI: RSDT (v001 A M I OEMRSDT 0x03000517 MSFT 0x00000097) @ 0x1ff40000 ACPI: FADT (v002 A M I OEMFACP 0x03000517 MSFT 0x00000097) @ 0x1ff40200 ACPI: MADT (v001 A M I OEMAPIC 0x03000517 MSFT 0x00000097) @ 0x1ff40300 ACPI: OEMB (v001 A M I OEMBIOS 0x03000517 MSFT 0x00000097) @ 0x1ff50040 ACPI: DSDT (v001 0ABBD 0ABBD001 0x00000001 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0xe408 ACPI: local apic disabled Allocating PCI resources starting at 20000000 (gap: 20000000:e0000000) Built 1 zonelists Kernel command line: root=/dev/hda8 vga=0x317 selinux=0 splash=silent resume=/dev/hda7 bootsplash: silent mode. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 600.272 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 513460k/523520k available (1866k kernel code, 9436k reserved, 658k data, 204k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1187.84 BogoMIPS (lpj=593920) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9fbff 00000000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1.50GHz stepping 08 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. checking if image is initramfs... it is Freeing initrd memory: 1405k freed ACPI: Looking for DSDT in initrd... not found! not found! ACPI: setting ELCR to 0200 (from 0030) NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050211 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: Embedded Controller [EC0] (gpe 28) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 12) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 12) ACPI: Power Resource [GFAN] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca) pnp: 00:08: ioport range 0xc00-0xc7f has been reserved pnp: 00:08: ioport range 0x290-0x29f has been reserved pnp: 00:08: ioport range 0x230-0x23f has been reserved apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1133452752.894:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API vesafb: framebuffer at 0xd0000000, mapped to 0xe0880000, using 6144k, total 65536k vesafb: mode is 1024x768x16, linelength=2048, pages=41 vesafb: protected mode interface info at c000:5575 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 57135 bytes,<6>...found (1024x768, 36789 bytes, v3). Console: switching to colour frame buffer device 127x44 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 6 PCI: setting IRQ 6 as level-triggered ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 6 (level, low) -> IRQ 6 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize loop: loaded (max 8 devices) mice: PS/2 mouse device common for all mice input: PC Speaker md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 5, 131072 bytes) TCP: Hash tables configured (established 32768 bind 32768) NET: Registered protocol family 1 PM: Checking swsusp image. PM: Resume from disk failed. ACPI wakeup devices: P0P1 LAN0 CBS0 CBS1 P394 MPCI MODM USB1 USB2 USB3 EHCI SLPB ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 204k freed input: AT Translated Set 2 keyboard on isa0060/serio0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 5 (level, low) -> IRQ 5 ICH4: chipset revision 3 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: IC25N060ATMR04-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: TSSTcorpCD/DVDW TS-L532A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB Synaptics Touchpad, model: 1 Firmware: 6.1 180 degree mounted touchpad Sensor: 35 new absolute packet format Touchpad has extended capability bits -> multifinger detection -> palm detection input: SynPS/2 Synaptics TouchPad on isa0060/serio4 hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 > hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Attempting manual resume PM: Checking swsusp image. swsusp: Suspend partition has wrong signature? PM: Resume from disk failed. ReiserFS: hda8: found reiserfs format "3.6" with standard journal ReiserFS: hda8: using ordered data mode reiserfs: using flush barriers ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda8: checking transaction log (hda8) ReiserFS: hda8: Using r5 hash to sort names md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. bootsplash: status on console 0 changed to on device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com cdrom: open failed. SCSI subsystem initialized kjournald starting. Commit interval 5 seconds EXT3 FS on hda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. FAT: bogus number of reserved sectors VFS: Can't find a valid FAT filesystem on dev hda6. Capability LSM initialized ieee1394: Initialized config rom entry `ip1394' ieee1394: raw1394: /dev/raw1394 device initialized ohci1394: $Rev: 1250 $ Ben Collins ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 ACPI: PCI interrupt 0000:02:05.2[C] -> GSI 5 (level, low) -> IRQ 5 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[feaff000-feaff7ff] Max Packet=[2048] video1394: Installed video1394 module parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] lp0: using parport0 (interrupt-driven). ieee1394: Host added: ID:BUS[0-00:1023] GUID[xxxxxxxxxxxxx] usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 5, io base 0xd800 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 5, io base 0xd880 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:1d.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 5, io base 0xdc00 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected Linux agpgart interface v0.100 (c) Dave Jones ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 4 PCI: setting IRQ 4 as level-triggered ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 4 (level, low) -> IRQ 4 ehci_hcd 0000:00:1d.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 4, pci mem 0xfebffc00 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected agpgart: Detected an Intel 855GM Chipset. agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 256M @ 0xe0000000 usb 1-1: new low speed USB device using uhci_hcd and address 3 PCI: Enabling device 0000:00:1f.5 (0005 -> 0007) ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 6 (level, low) -> IRQ 6 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49332 usecs intel8x0: clocking to 48000 Linux Kernel Card Services options: [pci] [cardbus] [pm] ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 5 (level, low) -> IRQ 5 Yenta: CardBus bridge found at 0000:02:05.0 [1043:1894] Yenta: ISA IRQ mask 0x0408, PCI irq 5 Socket status: 30000006 ACPI: PCI interrupt 0000:02:05.1[B] -> GSI 5 (level, low) -> IRQ 5 Yenta: CardBus bridge found at 0000:02:05.1 [1043:1894] Yenta: ISA IRQ mask 0x0408, PCI irq 5 Socket status: 30000006 8139too Fast Ethernet driver 0.9.27 ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 5 (level, low) -> IRQ 5 eth0: RealTek RTL8139 at 0xe12dac00, xx:xx:xx:xx:xx:xx, IRQ 5 eth0: Identified 8139 chip type 'RTL-8100B/8139D' ieee80211_crypt: unsupported module, tainting kernel. ieee80211_crypt: registered algorithm 'NULL' ieee80211: unsupported module, tainting kernel. ipw2200: unsupported module, tainting kernel. ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.1 ipw2200: Copyright(c) 2003-2004 Intel Corporation ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 5 (level, low) -> IRQ 5 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection NET: Registered protocol family 10 cdrom: open failed. st: Version 20041025, fixed bufsize 32768, s/g segs 256 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Disabled Privacy Extensions on device c033d600(lo) IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2002 Netfilter core team ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (4090 buckets, 32720 max) - 248 bytes per conntrack Disabled Privacy Extensions on device de9a5400(sit0) usbcore: registered new driver hiddev input: USB HID v1.10 Mouse [Genius NetScroll + Mini Traveler] on usb-0000:00:1d.0-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver Adding 2104472k swap on /dev/hda7. Priority:42 extents:1 cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0x800-0x80f: clean. cs: IO port probe 0x800-0x80f: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0xa00-0xaff: clean. eth0: link down NET: Registered protocol family 17 fglrx: unsupported module, tainting kernel. fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes. ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 5 (level, low) -> IRQ 5 [fglrx] module loaded - fglrx 8.19.10 [Nov 9 2005] on minor 0 [fglrx] ACPI power management is initialized. [fglrx] Internal AGP support requested, but kernel AGP support active. [fglrx] Have to use kernel AGP support to avoid conflicts. [fglrx] Kernel AGP support doesn't provide agplock functionality. [fglrx] AGP detected, AgpState = 0x1f000217 (hardware caps of chipset) agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [fglrx] AGP enabled, AgpCommand = 0x1f000314 (selected caps) [fglrx] free AGP = 256126976 [fglrx] max AGP = 256126976 [fglrx] free LFB = 52719616 [fglrx] max LFB = 52719616 [fglrx] free Inv = 0 [fglrx] max Inv = 0 [fglrx] total Inv = 0 [fglrx] total TIM = 0 [fglrx] total FB = 0 [fglrx] total AGP = 65536 ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU1] (supports 8 throttling states) eth0: no IPv6 routers present Non-volatile memory driver v1.2 eth1: no IPv6 routers present drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic usbcore: registered new driver usbserial_generic usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 ACPI: AC Adapter [AC0] (off-line) slamr: unsupported module, tainting kernel. slamr: SmartLink AMRMO modem. slamr: probe 8086:24c6 ICH4 card... ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 6 (level, low) -> IRQ 6 PCI: Setting latency timer of device 0000:00:1f.6 to 64 slamr: mc97 codec is CXT22 slamr: slamr0 is ICH4 card. ACPI: Battery Slot [BAT0] (battery present) slusb: unsupported module, tainting kernel. ST7554 USB Modem. usbcore: registered new driver ST7554 USB Modem ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Lid Switch [LID] ACPI: Fan [FN00] (off) ACPI: Thermal Zone [THRM] (29 C) SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.3 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.3 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 NET: Registered protocol family 4 ax25: unsupported module, tainting kernel. NET: Registered protocol family 3 NET: Registered protocol family 5 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.3 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87